No Products in the Cart
The Ultra Wheel Hunter Dually is a 16x6 aluminum rear wheel for Ford Transit vans from 2015-2026. It's cast aluminum with a black finish and milled accents that give the spokes a two-tone look. The wheel uses a dually design with eight lug holes and weighs 31 pounds, built for the heavier load demands of a dual rear axle setup.
About This
Ultra Hunter Van Dually 16x6 -130
Built for the 6x180 Van Platform
Ford Transit vans running the 6x180 bolt pattern have a narrow pool of purpose-built wheel options, and the Ultra Hunter Van Dually 003 fills that gap with a wheel sized and offset specifically for rear dually positions. The 138.80mm hub bore fits these platforms, and the 2,500-lb load rating supports the demands of commercial and passenger van applications. At 16x6 inches with a -130mm offset, the mounting surface sits well rearward of centerline, positioning the wheel outward for the wide rear track that dually fitment requires.
Split Six-Spoke Design with Milled Accents
The Hunter Van Dually carries a split six-spoke layout across a concave face, with milled spoke windows and accent details cut into the gloss black finish. The contrast between the deep gloss black surfaces and the milled brightwork gives the wheel a layered, intentional look without relying on chrome or polished finishes. Exposed lug hardware sits in a circle around the hub bore, visible on the face and adding a functional, hardware-forward character to the design. A center cap (A89-0068BK) is included with this wheel.
One-Piece Alloy Construction
Ultra builds the Hunter Van Dually as a one-piece alloy wheel, a construction that suits the long-haul, high-cycle demands of van and light commercial applications. One-piece alloy holds its structural integrity across the full face-to-barrel span without seams or fasteners, and the mold supports the concave spoke geometry and milled detail work in a single continuous form. At 30 lbs, the wheel carries the mass appropriate for a dually rear position running a 2,500-lb load rating on a commercial platform.
Fitment Details for Rear Dually Position
The 6x180 bolt pattern is specific to Ford Transit van platforms, including the T-150, T-250 and T-350, and this wheel is sized for the rear dually position on those applications. The -130mm offset is an extreme outboard figure, placing the mounting surface deep into the barrel to achieve the wide rear track spacing dually setups require. Backspacing measures -1.62 inches, with a front spacing of 8.62 inches. This wheel is also offered in additional sizes and finishes across the Hunter Van Dually lineup for buyers who need a different fit within the same platform family.
